2 square metre climbing wall with numbers climbing holds for kids
The climbing wall consists of 2 climbing boards ready for setup. The climbing boards each measure 1245 x 830 x 15 mm corresponding to about 1 square meter per plate. There are preinstalled t-nuts in the plates, so that the climbing grips are easy to mount. There are 30 t-nuts per square meter, which provides optimal options for screwing climbing routes with varying degrees of difficulty. Included with the 2 plates is a package of 15 colourful numbers climbing holds for children. The package contains the numbers from 0 to 9 as well as the characters -, +, x, / and =.
The climbing holds come with bolts, ready to mount.
The climbing boards are made of water-resistant birch plywood with impact-resistant friction surface (quartz sand surface for better friction). The climbing boards are painted on all sides and can be used indoors. As there may be differences in how the climbing boards should be mounted, depending on whether it is a brick wall, a wooden wall, a concrete wall or a drywall, screws are not included for setting up the climbing boards.
Impact and safety:
Climbing facilities in public places must comply with the playground regulations for safety and fall grounds. There is no requirement in private homes. The following are therefore just our recommendations for you who want to build a climbing wall at home.
- Do not build a climbing wall taller than 2.5 meters.
- Make sure there is no radiator or furniture standing right next to the climbing wall.
- Always have a mattress lying under the climbing wall that the kids can jump down and land softly on.
At Gubbies, we make tailor-made special solutions for fall surfaces for climbing gyms. Call us or write to us if you are interested in hearing more about the solutions we can offer. Our Crash Pads can also be a good solution for fall surfaces under smaller climbing walls.